Call us now

(855) 645-7855

All Over


Email Adress


Overhead Garage Doors: Common Problems and Fixes

Overhead garage doors play a vital role in providing security and convenience to homeowners. However, like any mechanical system, they are susceptible to problems and malfunctions. Understanding the common problems that can arise with overhead garage doors and knowing how to fix them can help homeowners maintain the functionality and longevity of their doors. In this article, we will explore the most common problems encountered with overhead garage doors and provide practical solutions for each issue.

Malfunctioning Garage Door Opener

  1. No response to remote or wall switch

When the garage door opener fails to respond to remote control commands or wall switch activation, the issue may lie in the power source or connections.

  1. Checking power source and connections

Ensure that the garage door opener is properly plugged into a working power outlet. Check the circuit breaker or fuse box to ensure there are no tripped breakers or blown fuses. Additionally, inspect the wiring connections for any loose or damaged wires.

  1. Replacing batteries or faulty components

If the power source and connections are in good condition, consider replacing the batteries in the remote control. If the issue persists, there may be a faulty component within the garage door opener that requires professional attention. If you need any guidance about how to repair your opener ? Visit our article about Garage Door Openers: Repair and Replacement

Noisy Garage Door Operation

  1. Identifying the source of the noise

Noisy garage door operation can be caused by various factors, such as worn-out rollers, loose hardware, or lack of lubrication. Identifying the source of the noise is essential for appropriate troubleshooting.

  1. Lubricating moving parts

Apply a high-quality silicone-based lubricant to the rollers, hinges, and tracks. Lubrication reduces friction and minimizes noise during door operation. Avoid using oil-based lubricants as they can attract dust and debris.

  1. Tightening loose hardware

Inspect all the nuts, bolts, and screws holding the door and hardware in place. Tighten any loose hardware to eliminate unnecessary vibrations and noise during operation.

Imbalanced Garage Door

  1. Door sagging on one side

An imbalanced garage door, indicated by one side sagging lower than the other, can cause strain on the opener and affect the overall performance of the door.

  1. Adjusting spring tension

Check the tension of the garage door springs. Springs that are too tight or too loose can lead to an imbalanced door. Consult the manufacturer’s guidelines or seek professional assistance to adjust the spring tension accurately.

  1. Balancing the door for smooth operation

Using a level, ensure that the garage door is balanced and level. Adjust the spring tension or seek professional help to achieve proper balance. A balanced door not only improves performance but also reduces wear and tear on the door components.

Broken Garage Door Springs

  1. Signs of spring damage or failure

If you notice a broken or damaged garage door spring, it is crucial to address the issue promptly. Signs of spring failure include visible wear, gaps in the spring coils, or the door being heavy and difficult to lift manually.

  1. Replacing broken springs

Replacing garage door springs should be done by trained professionals due to the high tension involved. Springs should always be replaced with the correct type and size specified by the manufacturer.

  1. Seeking professional assistance for safety

Working with garage door springs can be dangerous and should be left to professionals. Seeking professional assistance ensures proper installation and reduces the risk of accidents or injuries.

Misaligned Garage Door Tracks

  1. Uneven door movement

If the garage door moves unevenly or appears to be off track, it is likely due to misaligned tracks. This can prevent the door from opening or closing smoothly.

  1. Inspecting and aligning tracks

Carefully inspect the tracks for any visible obstructions, damage, or misalignment. Gently tap misaligned sections with a rubber mallet to bring them back into proper alignment. Clear any debris or obstructions that may hinder the door’s movement.

  1. Clearing obstructions

Ensure that there are no objects or debris obstructing the tracks or interfering with the door’s movement. Clean the tracks thoroughly to remove dirt or grime that may hinder smooth operation. if you want to read more check our article about – The Benefits of Professional Garage Door Track Alignment

Damaged Garage Door Panels

  1. Cracked or dented panels

Damaged panels not only affect the aesthetics of the door but can also compromise its functionality. Cracks or dents should be addressed promptly to prevent further damage.

  1. Repairing or replacing damaged panels

Minor dents or cracks can often be repaired using appropriate techniques and materials. However, severe damage may require panel replacement. Consult a professional to assess the extent of the damage and recommend the appropriate solution.

  1. Proper panel maintenance

Regularly inspect the panels for any signs of damage and address them promptly. Clean the panels with a mild detergent and soft cloth to maintain their appearance and prevent corrosion.

Sensor Malfunction

  1. Garage door not closing properly

If the garage door fails to close completely or reverses after hitting the floor, it may be due to sensor malfunction.

  1. Cleaning and aligning sensors

Check the alignment of the safety sensors located near the floor on each side of the door. Ensure they are facing each other and not blocked by any objects. Clean the sensors with a soft cloth to remove any dirt or debris that may interfere with their operation.

  1. Adjusting sensor sensitivity

If the sensors are properly aligned but the issue persists, check the sensitivity settings. Follow the manufacturer’s instructions to adjust the sensitivity level to ensure proper operation.

Weather Seal Issues

  1. Air and water leaks

Damaged or worn-out weather seals can result in air drafts or water leaks around the garage door, compromising energy efficiency and protection.

  1. Replacing worn-out weather seals

Inspect the weather seals along the sides and bottom of the door for signs of wear or damage. Replace worn-out seals with new ones that provide a proper seal against air and water infiltration.

  1. Installing proper weather sealing

Ensure that the weather seals are properly installed and provide a tight seal around the door. Follow manufacturer guidelines and seek professional assistance if needed.

Overhead garage doors can experience various problems, but with proper understanding and timely action, most issues can be resolved. By addressing common problems such as malfunctioning openers, noisy operation, imbalanced doors, broken springs, misaligned tracks, damaged panels, sensor malfunctions, weather seal issues, homeowners can ensure the functionality and longevity of their garage doors. Regular maintenance, periodic inspections, and professional assistance when necessary are key to keeping overhead garage doors in optimal condition. if you want help try our services! at Fort Lauderdale Garage Door Repair

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts